Have you read my Blog? I hear it's getting better!
I have never used a Reddington rod but I've heard nothing but good things about them. Good luck!
My Blog...Check it Out!
That combo you have is a choice of many guides. Cost effective and good gear.
Knots. I will give you a list of what I use, but first, every fisher should own this tool
Fly Line to Backing:
Fly line to leader. There are several choices here.
First, If your line is just cut off at the end buy a 9' 3X tapered mono leader. Attach it (with the tool) to the fly line using a Nail Knot. Then you use this leader replacing tippet till the leader no longer has a taper. Then you cut the leader off leaving a foot connected to the fly line.
Put a "Perfection Loop" not a Surgeon's loop as a perfection hangs straight a Surgeon's kicks to one side.
Another choice is to add one of those woven loops to the end of your line, but again, learn the perfection loop as you will put this in the end of your leader to connect it to the fly line.
Lastly, making a loop IN you fly line. This can be done a couple of ways. I slice the end at an angle, fold it over and create a small loop, then secure it with fly tying thread.
Ant any rate you will want a LOOP in the end of your fly line and want to omit any KNOTS.
Then you connect the loops like this:
Okay, so now you have line to backing, and leader to line. Next comes TIPPET.
It will be the last piece of material you tie on before the fly. You want at most the same size as the leader. So if the leader is a 3X, tippet will be 3X or, 4X, or 5X etc.
Tippet gets smaller the higher the number. An old rule of thumb although has changed a little over the years, but still a good reference.
Take 9 subtract the X and that is the pound of the line. 9 - 3X = 6 pound.
Take a foot or so of tippet and attack it to the end of the fly line.
Or Double Surgeon's Knot
You are set. Find the knot that is quickest and easiest for you to attach the fly.
This site covers the other choices:
Good luck and welcome. Oh and once the line is attached to backing and a loop has been put in the line, you will only be left with needing to use 2 or 3 knots.
CHECK OUT MY BLOG http://utahflygoddess.blogspot.com/
There is no greater fan of fly fishing than the worm!
Not a member yet? Click this link to register.
Tell them Dryrod sent you!
Your Fly Fishing Moderator
As you are a beginner I would suggest you to select one of the many good quality small still waters for fly fishing. Try to avoid the temptation to start on a river or reservoir.
Fly fishing equipment kit must include:
Fly Rod – Rated AFTM 6-7 weight
Reel – Basic fly reel designed to hold 6-7 weight line plus 75+ meters of backing
Fly Line – Weight forward 7 floating fly line
Backing – Spool of polypropylene backing line, connecting fly line to reel
Forceps/snips – Combination for trimming line and unhooking fish
Landing Net – Means of landing your catch quickly and safely
Floatant/Sinkant – Treatments to make line/flies float or sink as desired.
Good fishing starter kit and a day's tuition with a good instructor will surely help you a lot. Moreover you can go through midlands-flyfishing blog.