Callville 7/28/10 - Printable Version +- Fishing Forum (https://bigfishtackle.com/forum) +-- Forum: Nevada Fishing Forum (https://bigfishtackle.com/forum/forumdisplay.php?fid=370) +--- Forum: Nevada Fishing General (https://bigfishtackle.com/forum/forumdisplay.php?fid=42) +--- Thread: Callville 7/28/10 (/showthread.php?tid=603709) |
Callville 7/28/10 - vegaskid - 07-29-2010 Hello anglers, So we got out from Callville about 7 again and fished till about 9. We trolled out of Callville Bay and north along the shoreline without a strike. We worked the Sandy Cove area with crankbaits and jigs with nothing. We then worked Hamblin Bay off the western most point and picked up a couple fish. Both fish were caught on a bucktail jig.The lmb was enticed working the jig across the sloping wall near the point. I just let the jig sink till bottom and worked it down the slope. I had several other strikes off that wall, but nothing else would stick. I picked up the small striper casting the jig out into the bay with a quick straight retrieval. Did not see any slurps or boils. [inline "7-28-10 scn3.jpg"] [inline "7-28-10 scn2.jpg"] [signature] Re: [vegaskid] Callville 7/28/10 - TheWhizzle - 07-30-2010 Good job man - that's a nice bass. [signature] Re: [TheWhizzle] Callville 7/28/10 - vegaskid - 07-30-2010 Thanks. [fishin] [signature] Re: [vegaskid] Callville 7/28/10 - the_agent - 07-30-2010 good catch, how deep were they holding [signature] Re: [the_agent] Callville 7/28/10 - vegaskid - 07-30-2010 the large mouth was about 20-25 feet down of the edge of a slope wall, maybe 10-15 yards of the shoreline. Im not able to get real close to shore with my big boat so I cant mark the depth, I have to go of shoreline structure and guessing how long it takes my jig to hit bottom. the striper was in the middle of the cove over 45-70 feet of water and I ws working the jig at maybe 5-8' [signature] |