12-17-2005, 04:46 AM
Hey whatever it takes right? Here is a picture of my Cardiac Canyon (11 1/2' X 5') The fish finder screem is mounted on an aluminum plate that is "L" shaped so it slides over the frame.
[url "http://www.pbase.com/albot/cardiac_pics"][/url][url "http://www.pbase.com/albot/image/16450129"]![[Image: 16450129.fishfinder2.jpg]](http://mk31.image.pbase.com/u27/albot/small/16450129.fishfinder2.jpg)
[/url]
We put a 4'X5' aluminum deck on them so you can stand up on it.
Here is a picture of the transducer moounted to a square aluminum pipe about 18" long, with a pin so you can slide it up and down. That little black dot is the flush mount for scotty rod holders, I have added two more, so my rods stick slightly out to the left side and towards the back. The back of the seat is in the upper left corner.
The motor attaches to the motor mount upper right.
[url "http://www.pbase.com/albot/image/16450133"]![[Image: 16450133.flushScottyrodholderbase.jpg]](http://k41.pbase.com/u27/albot/small/16450133.flushScottyrodholderbase.jpg)
[/url]
The cardiac is my big lake craft, my small lakes or hike ins is the Echo (4' x 3') made by Venture Outdoors. It has a small metal frame the seat in the back is attached with straps so you can tilt it back for comfort. In the middle of this picture (That black thing sticking up) is the TUBE scotty rod holder that straps around your tube (I know have two - one sticks back the other to the side) I use the strap on tube for "Fishing Buddies" for that square tube and my transducer and that plate that my screen is mounted to slides right between the frame and the tube.
[url "http://www.pbase.com/albot/image/47297131"]![[Image: 47297131.VentureOutdoorsEcho.jpg]](http://mikeli.image.pbase.com/v3/21/82821/4/47297131.VentureOutdoorsEcho.jpg)
[/url]
(if you double click on pictures it will take you to our pbase for more pictures of the boats.)
[signature]
[url "http://www.pbase.com/albot/cardiac_pics"][/url][url "http://www.pbase.com/albot/image/16450129"]
[/url] We put a 4'X5' aluminum deck on them so you can stand up on it.
Here is a picture of the transducer moounted to a square aluminum pipe about 18" long, with a pin so you can slide it up and down. That little black dot is the flush mount for scotty rod holders, I have added two more, so my rods stick slightly out to the left side and towards the back. The back of the seat is in the upper left corner.
The motor attaches to the motor mount upper right.
[url "http://www.pbase.com/albot/image/16450133"]
[/url] The cardiac is my big lake craft, my small lakes or hike ins is the Echo (4' x 3') made by Venture Outdoors. It has a small metal frame the seat in the back is attached with straps so you can tilt it back for comfort. In the middle of this picture (That black thing sticking up) is the TUBE scotty rod holder that straps around your tube (I know have two - one sticks back the other to the side) I use the strap on tube for "Fishing Buddies" for that square tube and my transducer and that plate that my screen is mounted to slides right between the frame and the tube.
[url "http://www.pbase.com/albot/image/47297131"]
[/url] (if you double click on pictures it will take you to our pbase for more pictures of the boats.)
[signature]