Anchor suggestion needed

[8andout17]

What style/type/weight anchor do you recommend for a 14 aluminum boat in Lake Mead. I typically stay in water less than 60 feet deep.

I would also appreciate your anchor suggestions for Willow Beach.

Thanks!
[signature]

[fishrdan]

A small "fluke" anchor should serve both places well.

I have a 9# Tie Down Engineering fluke for my 18'er and had it hold in nasty stuff out at Mead, much worse than you'll be in in a 14'er.

Willow depends on where you're going. I've had a 15# navy anchor bouncing long the rock/gravel bottom up by the dam when the flow rate was up, wouldn't hook up even though the name on the anchor is "Hooker"....

I usually take my 14' jon boat to Willow, and use one of those collapsible 4 prong anchors, works well, but I'm not anchoring in fast current.

Get some chain for the anchor if you want it to hold, and not pull. I have a 7' and 13' sections of 5/16" that I use on Mead, if it's nasty I'll use all 20' out the bow. Smaller chain would be appropriate for your boat, 5' or so.
[signature]

[8andout17]

Thanks for the info! []
[signature]

[iamthesmf]

http://slideanchor.com/store/index.php/t...nchor.html

No chain required.
[signature]

[doz]

[quote iamthesmf]http://slideanchor.com/store/index.php/the-box-anchor.html

No chain required.[/quote]

Came in to suggest the same thing. Great anchor. A little pricey, but worth it.
[signature]

[iamthesmf]

And the Danik hook for the rope.

http://slideanchor.com/store/index.php/danik-hook.html
[signature]