Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need New Powered 'Toon
#45
Get some 303 Protectant, not Armoral. Walmart carries it. Clean the toon with it periodically during the year and remember to hose and soap down the toon after every trip,
As for the Pump, the adapter is a piece of hose that fits into the valve. Call NFO and I bet they would send you one.
There is also K-Pumps. The beveled blue cap fits perfect into valve and no adapter needed. The 100 is single action and great for topping off, the 200 is double action and the only pump you would need.
Be sure to top off at 3 to 4 lbs. Assuming you have the older Bravo Valves, they are a push once to open, push again to close. Fill in the open setting then close and top off.
Bags. There are 2 D rings on the inside next to seat and the outside on both sides of toon. Thread the straps through them. Mesh pocket on the inside as this is also the rod holder.
[Image: IMG_3878.jpg]
[Image: IMG_3876.jpg]


Welcome to the OUTLAWS!
[signature]
Reply


Messages In This Thread
Need New Powered 'Toon - by atvaholic - 02-07-2014, 01:06 AM
Re: [idahoron] Need New Powered 'Toon - by jmach - 02-08-2014, 05:03 AM
Re: [atvaholic] Need New Powered 'Toon - by flygoddess - 02-21-2014, 06:34 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)