+- Fishing Forum (https://bigfishtackle.com/forum)
+-- Forum: Utah Fishing Forum (https://bigfishtackle.com/forum/forumdisplay.php?fid=386)
+--- Forum: Fishing Gear, Gadgets, Techinques, Tactics &Tips (https://bigfishtackle.com/forum/forumdisplay.php?fid=129)
+--- Thread: Down Rigger weights (/showthread.php?tid=1068759)
Down Rigger weights - catfishbait - 04-04-2019
Im curious how heavy are alot of you experianced Down Rigger fisherman going on your weights. Im guessing some what variable depending on speed , depth, etc.
Appreciate any thoughts on this ....
[signature]
Re: [catfishbait] Down Rigger weights - OCF - 04-04-2019
I have 4 electric DR's on my boat. I use 10 lbs on the back two (I want them to hang as vertical as possible) DR's and 8 lbs on the two on the sides (a little blow back is fine).
I have 12 lbs that I only use at FG when I fish 100 plus feet in depth. The heavier weights seem to draw down on the battery faster.
I you have manual DR's you may want to use 6 or 8 lbs max. The heavier weights wear on your arms if the bite is fast.
[signature]
Re: [catfishbait] Down Rigger weights - Kent - 04-04-2019
You can also get by with lighter down rigger weights if you use the pancake style, as opposed to the cannon ball style.
[signature]
Re: [catfishbait] Down Rigger weights - SBennett - 04-04-2019
I love fishing extremely lightweight gear, such as a simple spinner and especially a single Hothead spoon by KCT with a single maggot.
I have a pair of 4lb pancakes that offer extreme low resistance and let your battery or arm be almost strain free.
[signature]
Re: [catfishbait] Down Rigger weights - liketrolling - 04-04-2019
[quote catfishbait]Im curious how heavy are alot of you experianced Down Rigger fisherman going on your weights. Im guessing some what variable depending on speed , depth, etc.
Appreciate any thoughts on this ....[/quote]
Like you said it depends on where you fish, and if you have manual
If I had manuals (which I don't) I would leave them down all the time and use a
Shasta Shuttle Hawk Downrigger release but would change the release that come with it, and put something good on
I use 10 lb pancakes.
next you can talk about Downrigger releases, I have tried a lot of them.
what works for me may not work for someone else
[signature]
Re: [liketrolling] Down Rigger weights - Bduck - 04-05-2019
4 electrics here. The back 2 I use 8# stick weights and those are deepest, great for not snagging bottom. The other 2 I use 8# fish weights in much shallower conditions covering the water column. With stick weights the blowback is not as great as fish weight but I'm satisfied with the outcome
[signature]
Re: [catfishbait] Down Rigger weights - muirco - 04-05-2019
10 lbs pancakes on all 4 downriggers. We also have 2 10lbs ball weights, but we hardly use them.
[signature]
Re: [muirco] Down Rigger weights - dubob - 04-05-2019
[font "Comic Sans MS"][#800000][size 3]Same here; 10 lb pancakes on all 4 riggers. Running the kicker full time while trolling keeps the batteries fully charged. Never had a problem.
[/size][/#800000][/font]
[signature]
Re: [catfishbait] Down Rigger weights - reelfast - 04-06-2019
You guys gave me an idea. Im filling pipe with lead shot and putting an eyelet on them. weights are expensive and if I lose a pipe with some lead shot I say good thing it wasn't a $40.00 ball.
Thanks
I might make a 4, a 6 and a 8 pound set up.
[signature]
Re: [reelfast] Down Rigger weights - dubob - 04-07-2019
[quote reelfast]You guys gave me an idea. Im filling pipe with lead shot and putting an eyelet on them. weights are expensive and if I lose a pipe with some lead shot I say good thing it wasn't a $40.00 ball.
Thanks
I might make a 4, a 6 and a 8 pound set up.[/quote][font "Comic Sans MS"][#800000][size 3]LOL. Using I" X 24" galvanized pipe (2 ea) and galvanized caps (4 ea) per set you'll be into the 4 lbs at about $61, the 6 lbs at about $68, and the 8 lbs at about $75. Those cost estimates don't include the eyelet or any stabilization. But hey, go for it and let us know how it turns out. You may be onto something. [/size][/#800000][/font][
][signature]
Re: [dubob] Down Rigger weights - reelfast - 04-07-2019
I was hopeful for a cheaper short cut. Those weights are getting spendy
[signature]
Re: [reelfast] Down Rigger weights - dubob - 04-07-2019
[quote reelfast]I was hopeful for a cheaper short cut. Those weights are getting spendy[/quote][font "Comic Sans MS"][#800000][size 3]I hear ya Dan. I got my [/size][/#800000][/font][font "Comic Sans MS"][#800000][size 3]MarineNow Coated Pancake Downrigger Canon Ball Weight with Fin 10 lb at this[/size][/#800000][/font] [url "https://www.amazon.com/gp/product/B0754L9C6B/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1"]link[/url] [font "Comic Sans MS"][#800000][size 3]last year for $29.99 (still the current price) with free shipping. It's great to be a 'Prime' member. [
][/size][/#800000][/font]
[font "Comic Sans MS"][#800000][size 3]
[/size][/#800000][/font]
[font "Comic Sans MS"][#800000][size 3]If you don't need/want the reflector tape on the fins, you can get [/size][/#800000][/font][font "Comic Sans MS"][#800000][size 3][font "Comic Sans MS"][#800000][size 3] pancakes in [/size][/#800000][/font][/size][/#800000][/font][url "https://www.amazon.com/gp/product/B0754L9C6B/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1"][/url][font "Comic Sans MS"][#800000][size 3]8 lb ($20.80), 10 lb ($28.70), 12 lb ($30.50), or 15 lb ($38.10) from the place I linked. [/size][/#800000][/font]
[signature]
Re: [catfishbait] Down Rigger weights - mtncat1 - 05-24-2019
i like 8 to 10 lbs fish shaped weights , i had a 4lber i found and ran it for a few years with no negative effect . i bought a mold last year and have made up quit a few spare weights . i will sell them for 25 bucks a piece to anyone who wants one .
[signature]